全國統一熱線：021-32205893
Mobrey液位開關產品特性
Mobrey干制品
液位測量和控制
nMobrey產品系列在各種干固體應用中提供可靠的點水平檢測
nMobrey系列PLS是一個槳式旋轉液位開關，可檢測大多數自由流動的高或低水平
散裝固體和粉末
nMobrey系列VLS振動桿液位開關具有消除堵塞的單探頭設計
和與叉相關的皺紋問題
2
干產品水平開關2015年6月
干燥產品液位開關概述
測量原理
干燥產品的測量和控制非常重要
行業，從采礦到精細化工。這就是多樣性
的被測產品，沒有單一的儀器能夠
可靠運行所有材料。
Mobrey產品提供一系列技術以確保用戶
能夠為應用選擇zui合適的儀器。
第3頁的表1是選擇久經考驗和可靠的Mobrey的指南
產品為您的應用。
Mobrey系列PLS槳葉液位開關
槳式開關可以用作高或低電平限制
開關。它容易通過血管壁安裝。小電
電機驅動在沒有材料的情況下自由旋轉的槳。
當槳葉由于材料的存在而受阻時，
微動開關啟動報警信號。一旦槳是
*停止旋轉，電機的電源被切斷，因此
延長電機壽命。物料液位下降后，電機為
返回其正常位置，槳葉開始再次旋轉。
系列PLS開關可用于顆粒，顆粒和
粉末干制品。它們可用于應用
材料超過160 kg / m3和低或中間應用
材料超過80 kg / m3。
系列VLS振動桿液位開關
振動桿液位開關是單點的解決方案
在自由流動的固體中，在寬密度范圍內，從
細粉末到顆粒。單桿設計提供了解決方案
可能變得阻塞或橋接的調諧叉。
振動桿通電并通過電子保持共振
電路。當被材料覆蓋時，振動的阻尼是
由啟動輸出的切換的電子裝置檢測
繼電器內置可編程時間延時。
Mobrey液位開關產品特性Overview of the Dry Products Level Switches Measurement principle The measurement and control of dry products is important in all industries, from mining through to fine chemicals. Such is the diversity of product to be measured, that no single instrument is capable of reliable operation in all materials. Mobrey products offer a range of technologies to ensure that users are able to select the most appropriate instrument for the application. Table 1 on page 3 is a guide to selecting a proven and reliable Mobrey product for your application. Series PLS paddle level switch The paddle switch may be used as either a high or low level limit switch. It is easily mounted through a vessel wall. A small electric motor drives a paddle which rotates freely in the absence of material. When the paddle is impeded by the presence of material, a microswitch actuates an alarm signal. As soon as the paddle is compley stopped from rotating, power to the motor is cut, thus extending motor life. After the material level falls, the motor is returned to its normal position and the paddle begins to rotate again. Series PLS switches can be used with granular, pelletized, and powdered dry products. They may be used in high level applications with materials over 160 kg/m3 and low or intermediate applications with materials over 80 kg/m3. Series VLS vibrating rod level switch The vibrating rod level switch is the perfect solution for single point level switching in free flowing solids across a wide density range, from fine powders to grains. A single rod design provides the solution to tuning forks which may become blocked or bridged. The vibration rod is energized and kept in resonance by an electronic circuit. When covered by material, the damping of the vibration is detected by the electronics which initiate the switching of the output relay after a built-in programmable time delay. Contents Overview of the Dry Products Level Switches . . . . page 2 Technical Specifications . . . . . . . . . . . . . . . . page 9 Mobrey Series PLS Ordering Information . . . . . . . . page 4 Dimensional Drawings . . . . . . . . . . . . . . . . page 10 Mobrey Series VLS Ordering Information . . . . . . . . page 7 Series PLS paddle level switch Series VLS vibrating rod level switch
Mobrey液位開關產品特性
|
||
|
||
 |
